• Driver
  • 드라이버
  •  
  • BLC-22H06P-C0 (use only BL3640)

    제품사양
    - Motor : BL3640
    - Input voltage : DC 12V / 24V 
    - Control type : PWM 
    - External input : Variable resistance, CW/CCW, start/stop
    - Weight : 8g
  • 제품사양
  • - Motor : BL3640
    - Input voltage : DC 12V / 24V 
    - Control type : PWM 
    - External input : Variable resistance, CW/CCW, start/stop
    - Weight : 8g
  • 제품상세



  •  

    - Brushless DC motor controller
    - long life time
    - Compact size, high efficiency
    - Cost effective, easy operation
    - Swift CW/ CCW direction change
    - Internal/ external speed control selection
    - Available variable resistance


     

    Embedded Controller for BLDC Motor Driver

    ■ Power input
       DC12V ~ DC24V must input range of the power.
       Please enter the rated voltage of the motor connected to the same voltage.

    ■ Speed Control
       Turning the internal volume in the clockwise direction (CW) of the motor speed increases.
       The speed of the motor is reduced by turning counterclockwise (CCW).

    ■ Using the external volume (optional).
       After the change in the internal volume, switch to EXT position INT (Default),
       If you connect an external volume module (sold separately), you can control the speed external volume.

    ■ Remote ON/OFF control function
       Insert the supplied cable to the ON/OFF control terminal is used to connect both ends of the cable to the switch.
        - Switch Open Status: Motor stopped
        - Switch Close Status: Motor drive
        [using do not connect the cable and switch]
        When power is applied to the controller as soon as the motor is running.

    ■ CW/CCW control
       After the CW/CCW Insert the supplied cable to the control terminal is used to connect both ends of the cable to the switch.
        - Switch Open Status: C.C.W direction of rotation
        - Switch Close Status: C.W direction of rotation


    ▼Power connentor      

    Male header PCB : SMW250-02 (YEON-HO), 1 row, Pitch : 2.5 mm

     - Suitable plug : SMH250-02 (YEON-HO)

     - Suitable for wire cross section : AWG#22 UL1007

     

    ▼Motor connector

    Male header (PCB) : MOLEX 53014-0610, 1 row, Pitch : 2 mm

     - Suitable plug : MOLEX 51004-0610

     - Suitable for wire cross section : AWG#26 UL1007

     

    ▼Control input connector  

    Male header (PCB) : MOLEX 53014-0210, 1 row, Pitch : 2 mm

     - Suitable plug : MOLEX 51004-0210

     - Suitable for wire cross section : AWG#26 UL1007

     

    ▼External volume connector

    Male header (PCB) : MOLEX 53014-0310, 1 row, Pitch : 2 mm

     - Suitable plug : MOLEX 51004-0310

     - Suitable for wire cross section : AWG#26 UL1007

     

     

     

     

     

     
 

TOP